0
Western Digital My Book 4TB External Hard Drive Data Recovery | XiRepair

Western Digital My Book 4TB External Hard Drive Data Recovery | XiRepair

“Fixing this Western Digital MacBook 4TB hard drive and recovering the customer's data was not satisfactory” – XiRepair Tech

“If your Western Digital hard drive is not recognized by your computer or does not have power, this guide may help you learn the disk drive repair process.”

Losing important data can be a nightmare in today's digital age. Whether it is due to accidental deletion, system crash, or hardware failure, recovering valuable data from hard drive is essential. This comprehensive guide will walk you through the necessary steps and techniques to successfully recover data from a hard drive, ensuring that your precious files are not lost forever.

In the following steps you will see the steps that were taken to recover the data of a real user using our amazing. Data recovery service. Customer brought Dead 4TB Western Digital MacBook External Hard Drive – Model WD40EZRZ.

Step 1. Diagnose the hard drive. We need to fully understand the current state of the drive to determine the most practical next steps for repair and data recovery.

Step 2. Remove the four Torx screws holding the Western Digital printed circuit board. After diagnosing the drive as a no-power issue, our technician needed to remove the PCB to visually inspect the board. However, one of the torx screws was badly stripped. So the XiRepair technician used a special Dremel to help safely remove the screw without causing irreparable damage to the customer. Western Digital Disk Drive.

Step 3. Visually inspect the printed circuit board (PCB) of the external hard drive. Signs of corrosion, heat damage, broken or missing parts are important indicators of areas that will need repair.

Step 4. Using a donor drive that matches the specifications with the customer's hard drive, remove the PCB and replace the U12 Bios chip from the customer's PCB to a new working donor drive.

Step 5. Clone the original drive to a known good destination drive. Reconnect the new donor drive with the original U12 rom chip to the original disk drive. Then power the device using an external dock or disk imaging system. More advanced imaging systems such as DeepSpur may yield better results. Data recovery Results compared to homegrown software.

Step 6. Connect the destination drive to a hexadecimal editor and reconstruction tool like Rstudio to sort the recovered data.

Step 7. Enjoy your recovered data! Once the drive is successfully fixed, we are able to use Data recovery Software to remove all valuable information such as photos, videos, documents, software and frequently deleted items.

No, unfortunately, it is not possible to use your hard drive as it was intended without a working printed circuit board. In almost all power data recovery cases the hard drive PCB will need to be repaired in order to recover the data.

  • No spin-up sound: When you power on your computer or connect the hard drive to a power source, listen for the spinning sound that indicates the hard drive is receiving power. If you hear no whirring or activity, this may indicate a lack of power. This device was repairing WD My Book No Power Fix PCB.
  • No Lights: Many Western Digital hard drives have LED lights that indicate power and activity. If these lights do not illuminate when the hard drive is connected to a power source, this indicates a power problem.
  • No Drive Detected: If your computer or device fails to recognize a Western Digital hard drive when connected, it may be due to a lack of power. Check if the drive appears in the system's BIOS or Device Manager. If it does not appear, there are likely electrical problems.

“Remember, Hard drives failing due to lack of power is unfortunately common! Chances are, if your hard drive is now showing signs of power, you probably need a data recovery service.

About the Author

Leave a Reply