0
Intel Issues Official Statement Regarding 14th and 13th Gen Instability, Recommends Intel Default Settings

Intel Issues Official Statement Regarding 14th and 13th Gen Instability, Recommends Intel Default Settings

More of us The last piece we detailed was Intel's challenge to motherboard vendors to follow up with stock power settings for Intel's 14th and 13th Gen Core series processors., Intel has now issued a follow-up statement on this. Over the past week or so, motherboard vendors have quickly released firmware updates with a new profile called 'Intel Baseline', which motherboard vendors assume will fix the instability issues. will solve

As it turns out, Intel doesn't seem to technically accept this, not to confuse Intel Baseline Profiles with Intel's default specifications. This means that Intel's baseline profiles seem to give the impression that they are operating at default settings, hence the use of the term 'baseline', but it still refers to motherboard vendors as MCE or Opens to use its own interpretations of multi-core enhancements.

To clarify things for users, Intel sent us the following statement:

Many motherboard manufacturers have released BIOS profiles labeled 'Intel Baseline Profile'. However, these BIOS profiles are not the same as the 'Intel Default Settings' recommendations that Intel recently shared with its partners regarding instability issues reported on 13th and 14th Gen K SKU processors.



These 'Intel Baseline Profile' BIOS settings appear to be based on power delivery guidance previously provided by Intel to manufacturers that varied power delivery for 13th and 14th generation K SKU processors based on motherboard capabilities. Describes the options.



Intel is not recommending that motherboard manufacturers use 'baseline' power delivery settings on boards capable of higher values.



Intel's recommended 'Intel Default Settings' are a combination of thermal and power delivery characteristics possible Power delivery profiles based on motherboard capabilities.



Intel recommends users implement the highest power delivery profile compatible with each individual motherboard design as described in the table below.



Click to enlarge Intel's default settings.

What Intel's statement is effectively telling consumers, is that consumers should not use the baseline power delivery profiles that are offered by motherboard vendors through a plethora of firmware updates. Instead, Intel is recommending that users choose Intel Default Settings, which is what Intel has rated the specific processor for out of the box, to achieve the advertised clock speed. No need to worry about 'over' optimization of firmware which can cause instability. There are many reports of this happening.

Not only that, but Intel default settings offer a combination of thermal specifications and power capabilities, including voltage and frequency curve settings that apply to the capacity of the motherboard used, and the power delivery equipped on the motherboard. At least for the most part, Intel is advising customers with 14th and 13th-Gen Core series K, KF, and KS SKUs to use the baseline profiles offered by motherboard vendors. Don't choose.

In digesting the contrast between the two statements, the main difference is that Intel's priority is to reduce the current passing through the processor, which is a maximum of 400 A for both the 14th and 13th Gen Core series processors, even Also using Extreme Profile. We know that motherboard vendors choose an unlimited power profile on their Z790 and Z690 motherboards, essentially 'unlimited' power to maximize performance at the cost of power consumption and heat. And there's current, which exacerbates problems and can cause repeated damage. Instability, especially at high intensity workloads.

Another variable Intel is recommending is that the AC load line should match the processor's design target, with a maximum value of 1.1 mOhm, and that the DC load line should be equal to the AC load line. Not above or below this recommendation for maximum stability. Intel also recommends that CEP, eTVB, C-states, TVB, and TVB voltage optimizations be enabled on Extreme Profile to ensure that stability and performance are consistent.

Given that Intel is basically advising customers not to use what motherboard vendors are offering to repair, we agree that when motherboards come out of the box they should be ' Default' settings should work unless asked otherwise. We understand that motherboard vendors are eager to show off what they can do with their equipment, features and firmware, but ultimately there needs to be some real communication between Intel and its partners regarding this issue. There is a shortage.

Following Intel's statement, they recommend users to implement the highest power delivery profile that is compatible with the caliber of motherboard being used, following the specification and design. According to Intel, what motherboard vendors have offered so far is open to interpretation, and we expect more to come in this story of continued progress regarding the instability issue. Is.

About the Author

Leave a Reply